Page 34 - Wash Around
P. 34
WASH AROUND
Installation
Neo-Tex Cleaning Material
Upper Hub
1) Mount the two 6” diameter x 42-1/2” tall hubs so that they set on top
of the lower hubs by securing the “Spider” Clamps to the shafts and
securing the “Skins” to the Spiders as shown. Be sure that the open
ends of the “C” channels are facing upward (FIGURE 1).
2) Locate the 41” x 8” Neo-Tex pieces. Fold them in half and place one
in the first, middle and last slot of each skin of the hub, making sure
they are pushed all the way to the bottom (FIGURE 2).
3) Repeat step 2 to add a second row of 41” x 8” Neo-Tex pieces
4) Locate the 41” x 10” Neo-Tex pieces. Fold them in half and place
one in the first, middle and last slot of each skin of the hub, making
sure they are pushed down as far as possible.
5) Locate the 28” x 8” Neo-Tex pieces. These pieces will NOT be
folded in half. They will however be loaded 2-ply (2 pieces per Wash
Clip). Slide one 2-ply set in the first, middle and last slot of each
skin of the hub, making sure they are pushed down as far as
possible (FIGURE 3).
6) Repeat step 4 for the top row of wash material. SEE NEXT PAGE.
First, middle
and last slot
of a skin
FIGURE 2
Hub
(top view)
On the top two rows
(28 x 8), the Wash
Clip goes through 2 FIGURE 3
pieces of cloth, then
FIGURE 1 slid into the channel
32 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL798