Page 38 - Wash Around
P. 38

WASH AROUND



             Installation


             Shaft Guard
                    4)  Lower the locking collar down to a height of 1/16” to 1/8” above the top bushing (1/8” max) and
                       tighten collar into place.
                    Note:  Be sure there at least a 2” clearance between the bottom of the Gyro Head and the top of
                           the shaft guard assembly. If there is not, the aluminum sleeves will need to be cut down
                           and new holes drilled to secure them to the plastic bushings




                                                                               2” minimum

                                1/16” to 1/8”



























































              36          Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681           1MANUL798
   33   34   35   36   37   38   39   40   41   42   43