Page 22 - Full Side Washer

FULL SIDE WASHER

Installation

Utilities

Hydraulic
This section will explain the installation of the hydraulic connections.
The stainless steel tubing atop the head frame assembly can be turned 180 degrees to
accommodate whichever side of the building your hydraulic unit is located.
1) Connect hoses to motors per diagram below.
Overhead view of section of typical; hydraulic routing to the motors

Feed to Return from driver Feed to
driver side side motor and back passenger
motor to hydraulic supply Return from side motor
tank passenger
side motor

Feed from hydraulic supply tank

Note: Above image shows typical driver side hydraulic installation.
Confirming Wheel Rotation
Note: Be sure to match the wheel rotation shown below. If the rotation is opposite as show
below, reverse the hydraulic feed lines to the motor.

18 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL854