Page 25 - Full Side Washer

FULL SIDE WASHER

Installation

Waves and Fins Cleaning Material

Lower Side Wheels
The fill for the lower side wheels is the same as the Belanger, Inc. Low Side Washer. This
section will assist in the installation of the lower side-wheel wash material.

CAUTION

Do not install any cleaning material until all equipment has been installed, turned on and
checked for hydraulic, pneumatic and water leaks.

1) Install bottom drive wave and seat counter-bore over the drive plate.
Counter Bore

2) Locate the 24” Fins™. Place 4 pieces over pins on bottom drive Wave™. One piece of wash
material should straddle the opening on each Wave™.

3) Install next Wave™ with slot opposite the opening on the previous one.
4) Repeat steps 2 and 3 until 9 waves have been stacked on top of the bottom Wave™ (total of 10
rows of wash material).
5) Press down on the top Wave™ stack to seat the wash material and verify the bottom Wave™ is
on the drive plate.

1MANUL854 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 21