Page 14 - QuickFire® Wrap Around Mix & Match
P. 14
QUICKFIRE® WRAP AROUND
Specifications
Requirements
Physical Working Envelope
Vehicle Clearance Height 90”
Vehicle Clearance Width 105”
Tunnel Space Required 222-1/2”
Unit Height 121”
Unit Width 153”
Utility
Electrical Two Outputs from Controller @110VAC
Hydraulic Oil 6 GPM @ 900 PSI
Pneumatic 1 CFM (clean, dry air) @ 90 PSI minimum 120 PSI maximum
Water Two 3/4” Pipe @ 8 GPM @ 40 PSI
Output
Physical
Vehicle clearance, height 90”
Utility
Pneumatic .3 CFM @ 90 PSI minimum 120 PSI maximum
DISCONNECT AND LOCKOUT ELECTRICAL POWER BEFORE SERVICING ANY
EQUIPMENT!
CAUTION
Always wear safety glasses when performing maintenance on any equipment
CAUTION
It is recommended that a licensed electrician is contracted to perform all electrical installations.
Note: YOUR HYDRAULIC SYSTEM MUST BE CAPABLE OF ADJUSTMENT TO 76 RPM
AT 900 PSI WHILE LOADED AGAINST VEHICLE. PLEASE VERIFY YOUR
SYSTEMS CAPABILITY TO MEET THESE SETTING WHILE RUNNING A
VEHICLE PRIOR TO INSTALLING PIECE OF EQUIPMENT!
CAUTION
A compressed Air System should be set correctly to support 90 PSI necessary to operate
equipment, but should never be set to deliver more than 120 PSI air pressure to the Belanger
specified equipment.
10 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL825
