Page 8 - Rocker Spin Clean

ROCKER SPIN CLEAN

Introduction

The Rocker Spin Clean is a piece of equipment that would be used to knock off the heavy dirt on the
lower rocker areas. This piece would be installed in the entrance end of a wash just after the enter switch
to help prep the vehicles. With the frame you have the ability to swivel the spray pattern up and down to
adapt to your needs. The Rocker Spin Clean has four IMEG 1/8” NPT 5°/ 0.5 GPM nozzles per side, that
rotate on a stainless steel triple bearing system swivel. With a maximum working pressure of 900 PSI of
fresh water, at 19 GPM. The Belanger Jet Pumping Station would support this peace of equipment.

Parts Included:

Part Number Description Qty
102417 Vector Spin Clean Weldment 2
1ROTO100 20” manifold and swivel 3/8” 2

1FITTNG-SW420 Swivel ONLY 2
6292 or 6293 Foam cover (red or blue respectively) 2
1NOZZL-MG200 Nozzle: 1MEG, 1/8 NPT, 5 DEG, 0.5 GPM 8

6 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL700