Page 12 - H2AIR® Arch
P. 12

®
                H2AIR  ARCH


                Introduction
                Overview

                The H2AIR® Arch is a rinsing and defoaming arch positioned at the end of a tunnel wash. It uses Top Flip
                Air Cannon™ DryLite™ Dryers and low pressure water to efficiently remove any foam remaining on the
                vehicle.
                The H2AIR Arch has a dual regulator Air Panel with a 4-way pneumatic valve that operates the Top Flip
                Assembly and requires one programmed output from the system controller. The default home position of
                the  Top  Manifolds  and  Dryers  is  20°  toward  the  entrance  of  the  tunnel.  The  speed  at  which  the  Top
                Assembly rotates is user defined and can be adjusted by changing the air pressure on the Air Panel or
                the Control Valves on the Cylinder. The system controller  will activate the 4-way  pneumatic valve and
                rotate the Top Assembly 20° toward the exit of the tunnel.
                The H2AIR®  Arch frame utilizes an engineered aluminum structure designed  especially for Belanger®
                equipment. Each Leg Assembly has two spray manifolds; one manifold is positioned to have the spray
                nozzles at an angle of 25° toward the entrance and in the other manifold the nozzles are at an angle of
                25° toward the exit of the tunnel. The Top Assembly also has two spray manifolds that rotate with the Top
                Flip Assembly. Together the Leg Manifolds and Top Manifolds provide a complete rinising on all of the
                surfaces of the vehicle.

                In order to maximize rinsing and drying on rear surfaces, Belanger® recommends setting the manifold
                rotation toward the exit of the tunnel early enough that the water direction can also be concentrated on
                the back of the vehicle mirrors. An Airis® Air Cannon™ Dual Kit, an air flow management systerm with
                rapid max-airflow delivery, is included with the H2AIR® Arch  and will provide quick and efficent removal
                of foam from the vehicles.

                The H2AIR® Arch also features RGB LED-illuminated spray manifolds in the Leg and Top Assemblies
                and Air Cannon™ Dryer Housings.

                                                   Top Flip Assembly
                                                   with Dryers, Housings
                                                   & Manifolds







                               Top Flip       Top Manifolds
                               Cylinder

                                                                                        Air Cannon™ DryLite
                                             Leg Assembly  with                        Housings with Airis® Asy
                                           Manifold & LED Lights






                                            ®
                                 View of H2AIR  Arch from
                                    Entrance of Tunnel
                                                                                              ®
                                                                                   View of H2AIR  Arch from
                                                                                       Exit of Tunnel








                    8     Belanger, Inc.® *PO BOX 5470 *Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681       1MANUL958
   7   8   9   10   11   12   13   14   15   16   17