Page 13 - Top Wheel Signature® Series

SignatureSignature SeriesSeries
TOP WHEEL SignatureSignature ® SeriesSeries

Specifications

Requirements

Physical
Tunnel space required 114”

Unit height 140”
Unit width 150-7/8”
Utility
Electrical 3 phase, 1HP motor
110V for Retract Option
Pneumatic .3 CFM @ 90 PSI minimum 120 PSI maximum
Water (1) 3/4” hose @ 4 GPM @ 40 PSI

Output

Physical
Vehicle clearance, height 90”

DISCONNECT AND LOCKOUT ELECTRICAL POWER BEFORE SERVICING ANY
EQUIPMENT!

CAUTION

Always wear safety glasses when performing maintenance on any equipment

CAUTION

It is recommended that a licensed electrician is contracted to perform all electrical installations.

CAUTION

YOUR HYDRAULIC SYSTEM MUST BE CAPABLE OF ADJUSTMENT TO 116 RPM AT
900 PSI (62.1 BAR) WHILE LOADED AGAINST VEHICLE. PLEASE VERIFY YOUR
SYSTEMS CAPABILITY TO MEET THESE SETTING WHILE RUNNING A VEHICLE
PRIOR TO INSTALLING PIECE OF EQUIPMENT

CAUTION

A compressed Air System should be set correctly to support 90 PSI necessary to operate
equipment, but should never be set to deliver more than 120 PSI air pressure to the Belanger
specified equipment.

1MANUL752 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 9