Page 18 - Top Wheel Signature® Series

SignatureSignature SeriesSeries
TOP WHEEL SignatureSignature ® SeriesSeries

Installation

Frame Assembly

Securing Drive Shaft to Driver Side Arm
The driver side Arm requires the installation of a shaft assembly prior to securing it to the frame
assembly.
1) Locate the driver side Arm (shown below). It is identified by the Motor Drive Mount Plate
pointed out in the image below.

Motor Drive Mount Plate

2) From the accessory box, locate the 1/2-13 x 3-1/2” bolt.
3) Rotate the bearing so the opening is aligned with the lower bearing mount bolt.

Align this slot and
bolt together

4) Remove the existing 1” long bolt and replace it with the 3-1/2” bolt from the accessory box.
This will prevent the bearing from spinning during the torque process.

Remove Insert the
the 1” bolt 3-1/2” bolt

14 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL752