Page 19 - Top Wheel Signature® Series

SignatureSignature SeriesSeries
TOP WHEEL SignatureSignature ® SeriesSeries

Installation

Frame Assembly

Securing Drive Shaft to Driver Side Arm
5) From the accessory box, locate the 1/2” thick spacer and the shaft. Also retrieve the 3/4-16 x
1-1/2” bolt, 3/4” flat washer and the 3/4” lock washer.
Secure the parts into place as shown below. Apply Red Loctite® 271™ on the threads of
the 3/4-16 x 1-1/2” bolt.
Electric Drive Shaft

3/4” flat washer
3/4” lock washer

1/2” thick spacer

3/4-16 x 1-1/2” bolt
(Apply red Loctite® 271™)

6) Using a torque wrench, tighten the 3/4-16 x 1-1/2” bolt to 120 ft/lb.

7) Remove the 3-1/2” bolt and replace the original 1” bolt and tighten it into place.

Remove Reinstall
3-1/2” bolt 1” bolt

1MANUL752 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 15