Page 22 - Top Wheel Signature® Series

SignatureSignature SeriesSeries
TOP WHEEL SignatureSignature ® SeriesSeries

Installation

Frame Assembly

Attaching the Legs
See the image below to help determine the passenger side leg from the driver side leg.

Shock Mounts
on both legs
Cylinder Mount on
passenger side ONLY

1) Cut the tie-wrap from the shocks mounted to the driver side and passenger side arms to
remove the 5/8 x 3” bolt. This will allow removal of the shock assembly.
2) Once the two legs have been identified, secure the leg to the arms in the orientation shown
below.

Shock Mounts
located here
(typical)

Direction of Travel

You may need someone to rotate the end of the legs to get the bolts into place. Four 7/16-14 x 1”
bolts are required on each leg. Be sure to use lock washers on all bolts.
Secure both
legs to the
arms

You may have to pivot the legs to access the bolt
holes
Driver Side Passenger Side

18 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL752