Page 25 - Top Wheel Signature® Series

SignatureSignature SeriesSeries
TOP WHEEL SignatureSignature ® SeriesSeries

Installation

Frame Assembly

Posi-Stop Installation
1) Locate the Posi-Stop mounting parts shown below.

2) Slide the spacer over the longer mount (above, right) and secure the two 3” Rubber Stop
Spacers to the posts as shown below.
3” Rubber-Stop Down Posi-Stop Up Posi-Stop Mount 2-1/4” x 1-1/4” Up Mount and Spacer
Spacer Mount Spacer

Down Posi-Stop Mount with 3” Up Posi-Stop Mount with 3” Rubber-Stop Spacer
Rubber-Stop Spacer

3) Secure the above assemblies into place on both legs as shown below.

Taller mount
is to be
installed on
the entrance
Mount Posi- Up side
Stops on driver
side leg here
Down
Stop 3” Rubber
Block Stop Spacer
Direction of Travel
Direction of Travel

4) Locate the two Posi-Stops and the four white plastic sleeves as identified below. Pinch the
sleeve together and slide it into the rubber stop. Slide the rubber stops onto the mounts.
Plastic
Sleeve

“Down”
Rubber
Rubber Stop Stop
Stop
Block

5) Screw the “Down” Rubber Stop until the wheels center height is at 53” and verify that the
shock does not make contact with the Stop Block.
Note: Make sure that both arms make contact with the rubber stops.

1MANUL752 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 21