Page 30 - Top Wheel Signature® Series
P. 30

SignatureSignature   SeriesSeries
            TOP WHEEL SignatureSignature  ®      SeriesSeries

            Installation


            Auto Retract Option (if applicable)

                Photo-Eye Retract Cylinder

                1)  Secure the Retract Cylinder into place on the passenger side arm and leg as shown below using 1/4-
                   20 shoulder bolts with 1/4-20 Nylock nuts and supplied washers.


                                                             Secure cylinder here
                                                               using the supplied
                                                             white plastic washers
                                                                  on both sides








                                                         Secure cylinder here using
                                                         the supplied 5/16” and 1/4”
                                                                   flat washers

                Air Panel Installation and Photo-Eye Utility Connections

                   1)  Locate the Air panel and secure it to the wall.











                       Note:  The  Air  Panel  will need to be mounted to the wall, preferably in the
                              equipment room.

                   2)  Run 3/8” poly-flow airline from the regulator of the air panel to the fitting on the Retract Cylinder
                       as shown below.




















             26          Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681           1MANUL752
   25   26   27   28   29   30   31   32   33   34   35