Page 34 - Top Wheel Signature® Series
P. 34

SignatureSignature   SeriesSeries
            TOP WHEEL SignatureSignature  ®      SeriesSeries

            Installation


            Electric Motor Installation

                Motor/Gearbox Electrical Feed Routing
                1)  Run the electrical feed through the 2 oval holes in the arm as shown below.


















                2)  Locate  the  2  supplied  filler  strips  with  the  pre-drilled  holes  in  them.  Feed  the  lead  wires
                   through the holes and snap the filler strips into place in the locations indicated below. Let the
                   wire ends hang until later.

















                3)  Locate  and  assemble  the  cover  mount  plate,  the  1/4-20  x  3/4”  bolts  and  the  1/4”  lock
                   washers. Secure the Motor Cover into place as shown below.

























             30          Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681           1MANUL752
   29   30   31   32   33   34   35   36   37   38   39