Page 55 - Top Wheel Mix & Match
P. 55
TOP WHEEL Mix and Match
Maintenance
General Repairs
Torque Plate and Electric Motor Replacement
Reinstall Motor Gearbox assembly
4) Secure gearbox in position using washers and retainer pins.
5) Feed the wiring through cover base, then through cord grip on the motor junction box.
Make sure to tighten cord grip properly to prevent any water intrusion.
6) Fasten the terminal block back into position using the Phillips screws. Be careful not to crimp or crush any of the
existing wiring.
7) Connect the wiring leads to the proper terminal, using previously tagged motor leads to maintain proper wiring
positions.
8) Replace junction box cap. Be careful not to crimp or crush any of the existing wiring.
9) Once the motor gearbox unit is properly secured into position, power can be turned back ON.
10) Verify wheel rotation prior to running any test vehicle through the system.
1MANUL749 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 51
