Page 22 - FreeStyler® Maintenance Manual

®
MAINTENANCE

Chapter 1 Introduction

UL Information

This applies when an optional door controller is installed

To reduce the risk of severe injury or death to persons all materials and
instructions intended for a Belanger® system and door operator shall
be read and comprehended. If the materials or instructions are not
present, they must be obtained prior to beginning any installation or
modification.

The Door Control System shall only be installed at locations that
provide a Service entrance. The service opening shall be labeled as an
exit and placards shall be installed on vertical doors indicating no
pedestrians.

The intended use of the Belanger® system is not to prevent injury to
persons, nor is it intended for entrapment or obstruction protection as
described in UL 325. This equipment is intended to enhance the system
by signaling the doors desired position, but it can be overridden by
operator’s safety features. The operator that is in direct control of the
door must independently provide entrapment protection in accordance
with UL325. Installation of the Belanger® system shall not interfere with
primary or secondary entrapment protection, nor interfere with any
provided safety features of the door operator.
The installer shall evaluate the existing/new operator requirements for
maintaining UL325 compliance. Examples of failure to comply include
making parallel connections to up/down buttons or when upward
motion brings door within 2 feet of a solid object, etc.

1-6 Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL222