Page 43 - FreeStyler® Maintenance Manual

®
MAINTENANCE

Chapter 2 Preventative Maintenance

Maintenance Management Report

CONFIRM WASH DATA PACKAGE TODAY
PACKAGE 1
PACKAGE 2
PACKAGE 3 TOTAL
PACKAGE 4
PACKAGE 5
PACKAGE 6 CYCLES
PACKAGE 7
PACKAGE 8

VPS® Photo-Eye

Quarterly

 Check the alignment of the Photo Eyes.
 In order to eliminate any buildup that may have occurred during daily operations, clean the
lens on the photo-eyes using a mild non-abrasive cleaning solution.
 Inspect each Photo Eye frame for cracks. Repair or replace as needed. Verify that all of the
Photo Eye anchor bolts are tightened.
 Wash the Photo Eyes with a good degrimer such as Tide laundry detergent and hot water.

General Input Locations
The images below show all of the locations of the input devices (sensors) housed inside or attached to
the Carriage. Selected parts of the Carriage have been removed for clarity.

Driver Side Exit Side of Carriage
Exit Out Reed Switch
Carriage Pneumatic Carriage Valve Passenger Side
Exit Out Reed Switch
Junction Block Junction Block

Water/Chemical Carriage Sensor
Pneumatic Valve Stacks Manifolds Junction Block

See the View on the Next Page

Carriage with Selected Passenger Side
Driver Side Parts Removed for Enter Reed Switch
Exit Outer Driver Side Clarity
Reed Switch Enter Reed Switch Enter Sonar Passenger Side
Exit Outer Reed Switch

Driver Side of Carriage Entrance Side of Carriage Passenger Side of Carriage
1MANUL222 Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 2-15