Page 17 - Sudzer® BL & FM
P. 17
®
SUDZER BL & FM
Chapter 1 Introduction
Before You Get Started
Tools needed for installation:
tape measure (16’ or longer) 1/8” Allen wrench
ladder 5mm Allen wrench
½” concrete drill 10mm open end wrench
level wire stripper
extension cord Phillips screw driver
hammer small flat screw driver
3/4” open end wrench wire ties
9/16” socket wrench safety glasses
9/16” open end wrench gloves
electrical tape dielectric grease
Tools and hardware to install electrical box to wall.
Tools and hardware to install 120VAC incoming electrical power.
Tools and hardware to install 120VAC and 24VDC outgoing power.
1MANUL026 Belanger, Inc.® * PO BOX 5470. * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1-5
