Page 144 - 2021-22 Auto Performance_Circle Track
P. 144
Engine Cradles
SB/BB Chevy
Engine Cradle ALL10172
A quality cradle for small block and big block Chevrolet engines. Casters included.
SB Chevy
2-Piece Engine Stand ALL10157
2-piece engine stand constructed
from 1" x 2" steel tubing is specially designed
to clear most oversized dry sump oil pans with
up to a 9" deep sump. Stand includes six 3/8" x 1" grade 5 bolts and accepts wheel kits with 3/8" studs.
Engine Lift Handles ALL10136 Need to move a spare motor when a
cherry picker isn’t the solution? These ma- chined aluminum sure grip handles will thread into any engine block or cylinder head with 3/8"- 16 coarse-thread holes. Sold as a set of 4.
Engine Lift Plate ALL10123 Ease engine swaps with the Allstar en-
gine lift plate. Bolts to manifold in place
standard Holley 4150/4160 and 4500 Dominator,
Rochester Quadrajet, Carter, Motorcraft, Edelbrock, Edelbrock Q-Jet, and Carter AFB carburetors.
All-In-One
Engine Lift Plate ALL10137
engine blocks and most Holley 4150/4160 and
4500 series, Rochester Quadrajet, Edelbrock, and
Carter AFB Carburetors. Plate features three lifting points for various chain positions allowing engine weight to be balanced or offset. An offset position is especially helpful when angling an engine (with transmission attached) in or out of a vehicle. Constructed of 3/16" thick zinc-plated steel.
Engine Oil Pressure Primer Tank ALL10535 Primer tank supplies initial oil to the
oil pump in engines equipped with a crank-driven oil pump. Fill primer tank with engine oil, then apply throughout the engine via the oil pressure sender/switch port to pre- lube the entire engine including the oil pump.
Oil Filter Cutter
ALL10538
Tool removes the outer shell
contamination or debris.
Engine cradles are available
in standard-duty or heavy-du-
ty, both made from black
powder-coated square tubing,
with provisions for mounting
wheels. All cradles are for V8
engines, include Grade 5 fasteners,
and may be easily disassembled for storage. Standard-duty cradles accept wheel kits with 3/8" studs. Heavy-duty cradles accept wheel kits with 1/2" studs. Wheel kits sold separately.
TOOLS & PIT EQUIPMENT
Standard Duty Cradles
ALL10130
Standard-Duty Wheel Mount
Heavy-Duty Wheel Mount
Part No.
Description
ALL10130
SB and BB Chevy
ALL10138
GM LS Series
ALL10145*
SB Ford
ALL10147
SB Ford Modular/Coyote
ALL10150
SB Mopar
ALL10151
Hemi (5.7 and 6.1)
Heavy Duty Cradles
Part No.
Description
ALL10132
SB and BB Chevy
ALL10139
GM LS Series
ALL10142
Oldsmobile
ALL10144
Pontiac
ALL10148*
SB Ford
ALL10149
SB Ford Modular/Coyote
ALL10152
SB Mopar
ALL10154
BB Ford
ALL10156†
BB Mopar
*Works with stock and most aftermarket blocks including Dart, World, and Ford Boss with ribbed engine mount bosses and bulged water jackets.
†Designed for most Mopar B and RB blocks. Will not work with 392 or 426 “Hemi” Engines.
Cradle Wheel Kits
Caster wheel kits may be mounted to most Allstar engine cradles or used when building projects around the shop. Kits include four caster wheels, both made from black pow- der-coated square tubing, with provisions for mounting wheels.
Standard Duty Caster
Casters are rated at 125 lbs. per wheel and feature a 3/8"-16 x 1-1/4" mounting stud.
Part No.
ALL10162 ALL10163
Description
3" Wheel Kit
3" Wheel Kit Locking
Heavy Duty Caster
Casters are rated at 300 lbs. per wheel and feature a 1/2"-13 x 1" mounting stud.
Part No. Description
ALL10163 3" Wheel Kit Locking
SB/BB Chevy Economy Engine Cradle
ALL10171
Cradle is great for storing or trans- porting engines safely. Designed
engines, cradle is fully welded from 1" square tubing and powder coated black. Cradle has provisions for mounting our standard-duty wheel kits with 3/8" wheel studs.
ALL10162
3" Wheel Kit
ALL10166
5" Wheel Kit
142 TRACK
CIRCLE 2021-22
