Page 145 - 2021-22 Auto Performance_Circle Track

Freeze Plug Driver Set ALL96482 Have problems installing
freeze plugs? Use these plastic drivers along with a hammer or mallet for simple installation without damaging the plugs or the block. Three sizes per set: 1-1/2", 1-5/8", 1-3/4". (Size refers to size of plug)
Valve Spring Compressor ALL96490 Adjustable C-clamp style

stock springs up to 1.750" diam-
eter and has a 1.100" “working
window” for access to keepers,
which may be too large for some
small diameter spring/retainer combinations. Com-
pressor has 9/16" hex for use with a wrench, ratchet, or impact. This tool will handle spring pressures in excess of 1200 lbs. without slipping off.
Feeler Gauges
Use in engine assembly to check con- necting rod side clearance, piston ring end gap, spark plug gap, and valve lash. Gaug- es have Metric and SAE sizing designations etched in each blade. Choose straight
or angled sets.
TOOLS & PIT EQUIPMENT
Individual Drivers
Part No.
ALL96484
Description
1-5/8" Driver
ALL96483
1-1/2" Driver
ALL96485
1-3/4" Driver
Cam Bearing Installation Tool ALL96470 For installing cam bearings quickly and easily without dam-
age. Shaft is steel; pilot and driver are aluminum.
LS Main Cap Removal Tool ALL96525 Quickly and easily
pull main bearing
caps off GM LS series
V8 engines, especially
those with main studs. Hook
tool to the bottom of cap, press
down on handles, and the balanced lever-
age pulls the cap out of the block with one swift motion. 26" long x 4" high.
Rod and Piston Holder ALL96478 Holder safely supports piston
and connecting rod assemblies during engine teardowns or assembly. Slots are 4-3/4"L. x 1-1/2"W. to accommodate most combinations. Holder measures 24" x 12" x 9-1/2" tall and can be disassembled for storage.
Rod Guide Tool ALL96480 Plastic tool slips over 3/8" or
7/16" rod bolts to aid piston instal- lation and eliminate the chance of rod bolts hitting crank. A must for any engine builder’s toolbox.
Part No.
ALL96420 ALL96421
Description
Straight Angled
Valve Lash Wrenches
Allstar valve lash wrenches save
precious time and eliminate fumbling with two sep- arate wrenches. Available for Jesel, T&D, and other poly-lock style rocker assemblies.
Part No.
Description
ALL96400
7/16" Box Wrench, 1/8" Allen Wrench, Jesel Assemblies
ALL96401
1/2" Box Wrench, 3/16" Allen Wrench, T&D Assemblies
ALL96402
9/16" Box Wrench, 3/16" and 7/32" Allen Wrenches
ALL96403
5/8" Box Wrench, 3/16" and 7/32" Allen Wrenches
Related Part
Part No.
ALL96481
Description
Rod Guide Tool Extensions 4.5", 1-Pair
Remote Starter Switch Kit
ALL76205

steel-cased foot pedal with 8' cord and assorted wire ends to work with many applica- tions. Provides hands-free engine cranking when adjust- ing valves.
Remote Starter Button
ALL76206
Kit is very helpful for valve lash main- tenance when the ignition panel can’t be reached. Leads are 60" long and come complete with gator clamps to connect to starter solenoid.
Spark Plug Indexing Tool ALL96510 Indexing positions the
ground strap of the spark
plug properly for best piston
dome clearance and un-
shrouds the electrode for a more even burn and possible gains spark plugs. Includes instructions.
Plastigage® Kit ALL96475
Plastigage strings are a simple and accurate way to
verify crankshaft, main, and rod bearing clearanc- es. Kit includes two green .001" to .003" and
one red .002" to .006" (12" long strings), individually packaged inside calibrated
sleeves. Detailed instructions are included.
CIRCLE 2021-22 143 TRACK