Page 146 - 2021-22 Auto Performance_Circle Track
P. 146
TOOLS & PIT EQUIPMENT
Spark Plug Index Shims
Stackable shims index spark
plugs at 30° intervals, up to 360°, prop-
erly positioning ground strap in cylinder
head for increased power and clearance be- tween spark plug and piston. Shims are intended Package of 24 shims contains (12) silver 60°, (12) black 90°, detailed instructions and dial chart.
Compression Tester
ALL96520
Tester checks cylinder compression
from 0 to 300 PSI and features an air-hold valve to reset gauge. One-piece stepped 18mm spark plug threads. Easy-to-read 2-1/2" dial is encased in a metal housing, surrounded by an anti-shock rubber cover. A quick-release coupler connects the included
Pilot Bushing Install Tool ALL26115 -
lot bushings or bearings for manual
transmissions including Muncie, Saginaw,
BorgWarner, T-10, and many other popular transmissions with .590" pilot shafts.
Clutch Alignment Tools
Splined, high-impact plastic
proper insertion of the transmission input shaft.
Part No.
ALL96505 ALL96506*
Description
Shim Kit, Standard O.D. (.800") Shim Kit, Small O.D. (.720")
* Shims are designed for close tolerance spark plug pockets such as those on cylinder heads.
Spark Plug Gap Tool ALL96515 Used to set consistent plug gap. Insert
plug into holder, then put feeler gauge between ground strap and electrode. Gently turn knurled knob until feeler gauge is snug.
Spark Plug Gap Tool Kit
ALL96516
Spark plug gap tool quickly and accurately gaps 14mm threaded spark plugs. Thread spark plug into tool, place the correct size feeler gauge beneath the ground strap, then tighten knob to set plug gap. Includes 17 different feeler gauge sizes .010" thru .035".
Port and Polish Kit ALL11052 Kit includes an assortment of 60, 80, and 120 grit cartridge rolls for cleaning
and modifying intake and exhaust ports to match gaskets, remove casting marks, and for smoothing out runners. Two 1/4" mandrels are included with each kit.
Dykem Layout Fluid ALL12070
cracking or chipping. 4-oz. container has a built-in brush under cap. Not intended for use in set-up of ring and pinion gear sets.
Flywheel Locking Tool SB/BB Chevy
ALL96426
bolts, clutch/pressure plate bolts, or cam gear bolts. Locking
SB Chevy Crank Socket ALL96424 Steel socket for rotating the crankshaft during
engine assembly features a 1" hex and a 1/2" ratchet drive.
Part No.
ALL14290 ALL14292
Description
1-1/8" Diameter, 10-Spline 1-1/8" Diameter, 26-Spline
Flexible Magnetic Pickup Tool
ALL14172
Flexible tool bends to multiple positions, extends up to 24" and has a magnetic end to quickly retrieve parts.
Telescoping Magnet ALL14173 A strong (3-pound
pull), telescoping
magnet that will retrieve
dropped tools or fasteners. Tool extends over 2', and retracts to
Telescoping Mirror ALL14174 A 1-1/4"
multi-positional,
telescoping mirror for inspecting hard-to-see
areas or locating engine oil leaks. Mirror is 6-1/2" long and extends to over 19".
144 TRACK
CIRCLE 2021-22
TONY JACKSON JR.
