Page 154 - Revit Architecture Basics

ENHANCED DETAILING – FLOOR AND ROOF

Enhanced detailing – floor and roof

Instance properties for floors

When the finished floor is selected, you see
following

Properties:
Level:
Here you can see which Level, floor top finish is
constrained to.
Height Offset From Level:

The floor top finish can be moved up/down
compared to Level.

Room Bounding:
Forms the boundary for the calculation of areas
and volumes.
Structural:
Specifies whether the floor must be included in the
analytical model – only relevant, if it is to be used
for the load calculation in Revit Structure.

Dimensions:
Please note that the Slope can only be entered if
one, and only one of the sides is defined to have a
slope. This is done on the Option Bar with Define
Slope.
Phasing:
You can assign phases in construction.

Type Properties for floors
Structure:
Here is created/edited the floor
structure (see section: "Advanced
detailing – Walls”

Function:
Here, choose if the floor is placed
outdoors or indoors. The quantity
extraction can be filtered on this
parameter.

154  NTI