Page 41 - MetroSelect Single-Line Configuration Guide

Transmit Scanner ID byte with receipt of an
³ 1 1 5 9 1 6 “i” (69H) via RS232 – The ID byte is transmitted
as 3 bytes (i.e. 0, 0, 1).

* Don’t Transmit Scanner ID byte with receipt
³ 1 1 5 9 0 6 of an “i” (69H) via RS232
Transmit NO READ if DC2 Activated

³ 1 1 8 1 1 1

* Do Not Transmit NO READ if DC2 Activated
³ 1 1 8 1 0 1

No Green LED During NO READ Transmit
³ 1 1 8 3 1 1
* Green LED During NO READ Transmit

³ 1 1 8 3 0 1

Transmit Serial Number
³ 9 9 9 9 6 9

Enable Motor On/Off Commands
³ 1 1 8 2 1 3
* Disable Motor On/Off Commands

³ 1 1 8 2 0 3
Disable RS232 Receive

³ 1 2 5 0 1 6

Normal RS232 Receive
³ 1 2 5 0 0 6
Enable Banco Control Mode

³ 1 2 5 0 1 3

Disable Banco Control Mode
³ 1 2 5 0 0 3

7–9