Page 198 - Chem Service 2016 Catalogue

METHOD 8250A/8270B - SEMIVOLATILE ORGANICS
Method 8250A is applicable for determination of semivolatile organic compounds in extracts prepared from all types of solid waste matrices,
soils, and ground water. Direct injection of a sample may be used in limited applications. Method 8250A can be used to quantify most neutral,
acidic, and basic organic compounds that are soluble in methylene chloride, and capable of being eluted without derivatization as sharp
peaks, from a gas chromatographic packed column by GC/MS.

Method 8270B is applicable for determination of semivolatile organic compounds by gas chromatography/mass spectrometry (GC/MS) by EPA 8000
capillary column technique. This method is used to determine the concentration of semivolatile organic compounds in extracts prepared from
all types of solid waste matrices, soils, and ground water. Direct injection of a sample may be used in limited applications. Prior to using this
method, the samples should be prepared for chromatography using the appropriate sample preparation and cleanup methods. This method
describes chromatographic conditions that will allow for the separation of the compounds in the extract, and for their qualitative and quantitative
analysis, by mass spectrometry.

SEMIVOLATILE MIXTURE #1
EPA METHOD 8250A/8270B SEMIVOLATILE MIXTURE #2
p-Acetophenetidide Fluoranthene EPA METHOD 8250A/8270B
Anthracene Hexachlorobenzene Bromobenzene n-Butylbenzene
Azobenzene Pentachloronitrobenzene Benzidine Chrysene
4-Bromophenyl phenyl ether Pentachlorophenol 1.2-Benzanthracene 3.3-Dichlorobenzidine
Di-n-butyl phthalate Phenanthrene Bis(2-ethylhexyl)phthalate p-Dimethylaminoazobenzene
4.6-Dinitro-o-cresol Propyzamide Butyl benzyl phthalate Pyrene
Diphenylamine 4-Aminobiphenyl
1000ug/mL in Methylene chloride (10 components)
1000ug/mL in Toluene (14 components) M-SV82502X4-1ML 1mL Ampule
M-SV82501U4-1ML 1mL Ampule

SEMIVOLATILE MIXTURE #4
SEMIVOLATILE MIXTURE #3 EPA METHOD 8250A/8270B
EPA METHOD 8250A/8270B Aniline Hexachloroethane
Bromobenzene n-Butylbenzene Benzyl alcohol 2-Methylphenol
Benzo(b)fluoranthene Dibenz(a,j)acridine Bis(2-chloroethyl)ether 4-Methylphenol
Indeno(1,2,3-C.D)pyrene Benzo(k)fluoranthene Bis(2-chloroisopropyl)ether N-Nitrosodimethylamine
1,2:5,6-Dibenzanthracene 3-Methyl cholanthrene 2-Chlorophenol N-Nitrosodi-n-propylamine
1,12-Benzoperylene 7,12-Dimethylbenz(a)anthracene 1.2-Dichlorobenzene Phenol
Benzo(a)pyrene Di-n-octyl phthalate 1.3-Dichlorobenzene 2-Picoline
1.4-Dichlorobenzene
1000ug/ml in Toluene (12 components)
M-SV82503U4-1ML 1mL Ampule 1000ug/mL in Methylene chloride (15 components)
M-SV82504X4-1ML 1mL Ampule
SEMIVOLATILE MIXTURE #5 SEMIVOLATILE MIXTURE #6
EPA METHOD 8250A/8270B EPA METHOD 8250A/8270B
Acetophenone 2,6-Dichlorophenol Acenaphthene 2,4-Dinitrophenol
Nitrobenzene Benzoic acid p-Nitroaniline Acenaphthylene
2,4-Dimethylphenol 2-Nitrophenol 2,4-Dinitrotoluene 4-Nitrophenol
Bis(2-chloroethoxy)methane 1-Chloronaphthalene 2,6-Dinitrotoluene ■
Hexachloro-1,3-butadiene N-Nitrosodi-n-butylamine Pentachlorobenzene 2-Chloronaphthalene
4-Chloroaniline Isophorone Fluorene 1,2,4,5-Tetrachlorobenzene
N-Nitrosopiperidine 4-Chloro-3-methylphenol 4-Chlorophenyl phenyl ether a-Naphthylamine ■
2-Methylnaphthalene 1,2,4-Trichlorobenzene 2,3,4,6-Tetrachlorophenol Dibenzofuran
2,4-Dichlorophenol Naphthalene b-Naphthylamine 2,4,5-Trichlorophenol
Diethyl phthalate o-Nitroaniline
1000ug/ml in Methanol (17 components) 2,4,6-Trichlorophenol Dimethyl phthalate
M-SV82505M4-1ML 1mL Ampule m-Nitroaniline
1000ug/mL in Methylene chloride (23 components)
SEMIVOLATILE MIXTURE #7 M-SV82506X4-1ML 1mL Ampule
EPA METHOD 8250A
Ethyl methanesulfonate Methyl methanesulfonate
1000ug/mL in Methylene chloride (2 components)
M-SV82507X4-1ML 1mL Ampule
BENZIDINE
EPA METHOD 8270B, 605, 625/1625, CLP
Benzidine
3,3-Dichlorobenzidine
2000ug/mL in Methanol (2 components)
M-PPHC7M5-1ML 1mL Ampule
M-PPHC7M5-5ML 5mL Ampule

197