Page 203 - Chem Service 2016 Catalogue

METHOD 8265 - VOLATILE ORGANIC COMPOUNDS
Method 8265 uses direct sampling ion trap mass spectrometry (DSITMS) for the rapid quantitative measurement, continuous real-time monitoring,
and qualitative and quantitative preliminary screening of volatile organic compounds (VOCs) in water, soil, soil gas, and air.
CLP VOLATILES MIXTURE #3
CLP VOLATILES MIXTURE #2
EPA 8000 EPA METHOD 8265, CLP EPA METHOD 8265, CLP
Ethylbenzene

Benzene
Bromodichloromethane 1,2-Dichloroethane
Chlorobenzene

Tetrachloroethene

1,2-Dichloropropane
Bromoform

1,1-Dichloroethene
Toluene
Carbon tetrachloride
Methylene chloride
cis-1,2-Dichloroethene
Trichloroethene

Chlorodibromomethane 1,1,2,2-Tetrachloroethane
m-Xylene
trans-1,2-Dichloroethene
1,1,1-Trichloroethane
Chloroform

cis-1,3-Dichloropropene
1,1-Dichloroethane
1,1,2-Trichloroethane
2000ug/ml in Methanol (12 components) trans-1,3-Dichloropropene p-Xylene (13 components)
2000ug/ml in Methanol
M-CLPVOL2M5-1ML 1mL Ampule M-CLPVOL3M5-1ML 1mL Ampule
HAZARDOUS SUBSTANCES LIST (HSL) CLP VOLATILE TLC GASES MIXTURE
VOLATILE STANDARD MIXTURES EPA METHOD 8265, CLP
EPA METHOD 8265, CLP Methyl bromide Methyl chloride
Acetone 4-Methyl-2-pentanone Chloroethane Vinyl chloride
2-Butanone Styrene
Carbon disulfide o-Xylene 200ug/ml in Methanol (4 components)
2-Hexanone M-PPW24CM2-1ML 1mL Ampule
2000ug/ml in Methanol:Water (90:10) (7 components)
M-HSL2N5-1ML 1mL Ampule INTERNAL STANDARDS
EPA METHOD 8265, CLP
N-10119-100MG 1,4-Difluorobenzene
S-10119M5-1ML 2000ug/mL in Methanol
S-10119M5-5ML 2000ug/mL in Methanol
METHOD 8275 - SEMIVOLATILE ORGANICS
Method 8275 is a screening technique that may be used for the qualitative identification of semivolatile organic compounds in extracts prepared
from nonaqueous solid wastes and soils by Thermal Chromatography/Mass Spectrometry (TC/MS).
Method 8275A is a semivolatile organic compounds (PAHs and PCBs) in soils/sludges and solid wastes using thermal extraction/gas
chromatography/mass spectrometry (TE/GC/MS)
MIXTURE #8 INTERNAL STANDARDS GC/MS TUNING STANDARDS
EPA METHOD 8275A EPA METHOD 8275A
Acenaphthene-d10 Naphthalene-d 8 N-11571-10MG Decafluorotriphenylphosphine (DFTPP)
Chrysene-d12 Perylene-d 12 S-11571BO-1ML 50ug/ml in Acetone
1.4-Dichlorobenzene-d4 Phenanthrene-d S-11571B0-5ML 50ug/ml in Acetone
10 S-11571X0-1ML 50ug/ml in Methylene Chloride
4000ug/ml in Methylene chloride (6 components) S-11571X5-1ML 2000ug/ml in Methylene chloride
M-PPHC8X12-1ML 1mL Ampule S-11571X5-5ML 2000ug/ml in Methylene chloride
INTERNAL STANDARDS
EPA METHOD 8275A
N-11000-50MG Acenaphthene-d 10
S-11000M5-1ML 2000ug/ml in Methanol
S-11000M5-5ML 2000ug/ml in Methanol
N-11467-10MG Chrysene-d 12
S-11467X5-1ML 2000ug/ml in Methylene chloride
S-11467X5-5ML 2000ug/ml in Methylene chloride
N-10217-100MG 1,4-Dichlorobenzene-d
4
S-10217M5-1ML 2000ug/ml in Methanol
S-10217M5-5ML 2000ug/ml in Methanol
N-12645-100MG Naphthalene-d
8
S-12645K5-1ML 2000ug/ml in Isooctane
S-12645K5-5ML 2000ug/ml in Isooctane
N-12851-10MG Perylene-d 12
S-12851X5-1ML 2000ug/ml in Methylene chloride
S-12851X5-5ML 2000ug/ml in Methylene chloride
N-12856-100MG Phenanthrene-d 10
S-12856X5-1ML 2000ug/ml in Methylene chloride
S-12856X5-5ML 2000ug/ml in Methylene chloride
S-12856M1-1ML 100ug/ml in Methanol
S-12856M1-5ML 100ug/ml in Methanol
202 Chem Service’s Quality Management System is Certified to the Internationally Recognized ISO 9001, ISO 17025, & ISO Guide 34 Quality Standards.