Page 119 - CATALOG REV 1 JUMBO LINE X-TRA INTELLI-TUBS

www.flipbuilder.com ©®
www.flipbuilder.com ©®
STEP 3 Remove wooden screws from front and back cap side panels. You will need 2 people to
remove front and back cap side panels from the crate and put them aside then.

After all side panels have been removed you will need 2 people to lift and carefully move
STEP 4 away two segments of fairing /lower skirt that are packed inside the crate around the base
of the tub Both segments are wrapped in bubble wrap to avoid scratching. FOR MODELS
EQUIPPED WITH FAIRING.
Special skirt design features new elegant fairing with chrome molding. Fairing is
wrapping around the tub to cover (fill) the clearance between the bottom of the tub and
floor to hide plumbing, etc.
NOTE 1: Photos show the difference between models equipped with fairing and
models without fairing.

NOTE: ALL JUMBO LINE EXTRA TUBS EQUIPPED WITH
FAIRING.

STEP 5 Remove wooden screws from special wooden stoppers that prevent tubs’ feet from
moving on the crate base.
Put stoppers aside.

119 | P A G E R M S ® JUMBO LINE X-TRA SERIES INTELLI-TUB®. WWW.RELAXMEDSYST.COM MAIL@RELAXMEDSYST.COM