Page 1043 - Wurth Total Catalogue

contents of the dent lifter set

Item Description Set Cont. Art. No. Pack Qty.
1 Sliding Hammer 1 0691 500 112 1
2 Glue sticks (0.5kg special adhesive, ø 12mm) 1 0890 100 057 1
Adaptor, round, stiff (yellow), ø 40mm
3 suitable for round and large deformations. 10 0691 500 115 10
The adaptor material enables high tensile forces and stress.
Adaptor, round, flexible (purple), ø 40mm
4 suitable for round and sharp edged deformations. 10 0691 500 116 10
The adaptor material can be adjusted to the shape of the dent by means of heating.
Adaptor, oval, stiff (yellow), 47 x 33 mm
5 suitable for scratches and grazing marks. 10 0691 500 117 10
The adaptor material enables high tensile forces and stress.
Adaptor, oval, flexible (purple), 47 x 33 mm
6 suitable for scratches and grazing marks. 10 0691 500 118 10
The adaptor material can be adjusted to the shape of the dent by means of heating.
Adaptor, round, small (blue), ø 35 mm
7 suitable for round and small deformations. 10 0691 500 121 10
The adaptor material can be adjusted to the shape of the dent by means of heating.
Adaptor, barrel-shaped (purple), 37 x 33 mm
8 suitable for glazing marks. - 0691 500 122 10
The adaptors are placed next to each other and then alternatively pulled.
9 Installation attachment for adaptor (for optimum installation and removal). 1 0691 500 114 1
10 Special spatula, flexible (adhesive residues can be easily removed from it). 1 0691 500 120 1
11 Gloves, size 9 (protect against undesired burns). 1 -
12 Grinding fleece (to roughen adaptors for initial use). 2 -
13 Cleaning towels (optimum for use with acetone and glass cleaner). 50 -

Applications:

1. Clean dent using acetone or 2. Install suitable adaptor on 3. Glue adaptor to deepest spot 4. Hand sliding hammer into the
brake cleaner. installation attachment and and cool using compressed adaptor and straighten dent.
apply special adhesive to air.
centre.

5. Using a hot air gun heat 6. Heat up the adhesive 7. Remove remaining adhesive
the adaptor up to approx. residue and remove it using residue using glass cleaner.
150°C and push it away to special spatula.
AUS. pub. 06/14 © the side using the installation
attachment.

12 5042