Page 1045 - Wurth Total Catalogue

Mini lifter - application

1. Clean dent with acetone or brake cleaner 2. Apply melted adhesive to the suitable 3. Glue the adaptor into the dent and align with
and if required, affix a cross mark. adaptor. the cross mark.

4. Cool the adaptor off with compressed air or 5. Attach the Mini Lifter to the adaptor and 6. Afterwards, spray Adhesive Remover,
freezing spray. Art. No. 0890 100 0. carefully pull out the dent. Art. No. 0893 141, onto the edge of the
adhesive.

7. Using the plastic wedge, carefully lift off 8. Carefully remove any adhesive residue with 9. An overextended dent can be reversed with
the edge of the adhesive and remove the acetone or brake cleaner. straightening cone.
adhesive from the paintwork. Art. No. 0691 500 110.

Caution:
Hot glue may damage/peel paint.
Testing prior to use is recommended.

AUS. pub. 08/13 ©

12 5062