Page 130 - Wurth Total Catalogue

pin stripe eraser

Removes glue residue, decals and pin
stripes from all cars and trucks.

• Developed to be far superior to other removers
on the market.
• It’s ease of use when removing vinyl decals and
graphics will be very cost effective due to the fact
that no messy clean up is involved after the job is
completed.

Diam. width chuck Art. No. Pack
mm mm mm Qty.
88 15 10 0585 90 1
• Available in a pair only.
Pack Qty. 1 = 1 pair (2 wheels).

Directions:
• Screw adaptor chuck into wheel.
• Install adaptor chuck onto an electric or air
powered tool that will not exceed 2000 rpm.

Caution:
• DO NOT use on acrylic paint finishes, or
else damage to the paint finish will occur.
• DO NOT exceed 2000 rpm (if tool is used
above 2000 rpm, personal injury may occur
as well as the object being cleaned becoming
permanently damaged).
• Test an inconspicuous area before use, as all
paints and decals are of different quality.
• If the eraser is new, best results are obtained
by roughing up the edge by spinning it
against a clean workbench edge.
• Always work in the opposite direction than the
eraser is spinning.
• Do not keep the eraser on he same spot for
too long, the warmth from the eraser may
effect both paint surfaces, and the metal
panel.
• Always wear protective goggles, ear and
hand protection.
• Only to be used up to the printed area of the
wheel, if used any further, damage may occur
from the arbour.

AUS. pub. 01/14 © Partner Product:

Personal Protective Equipment

03 3031