Page 242 - Wurth Total Catalogue

PLASTIC DYE

Visual improvement of all plastic parts
of the car.

• Restores faded plastic to original condition.
• Easy application.
• Can be applied in direct sunlight.
• Do not store or apply at temperatures below
+7ºC.
• Solvent free.

Attention:
Plastic Dye is humidity sensitive during
application. Therefore, ensure part to be treated
is dry before application and remains dry until
dye is cured.

Areas of Application:
Bumpers, synthetic leather roofs, folding roofs
(including cloth), interior plastic panels, rubber
parts, water pipes, foot board strips etc.

Instructions for Use:
Shake thoroughly before application. Wet
sponge with water and clean plastic parts with
the rough side of the sponge. Lightly squeeze
Colour Contents Art. No. Pack Qty. the sponge to eliminate most of the water, put
Black* 0893 280 1 plastic dye on the smooth side of sponge and
Anthracite* 75ml 0893 280 2 1 apply equally on the plastic part. Remove colour
* approximate indication of colour. from trims or lacquered surfaces immediately.
Once dried excess plastic dye can be dissolved
by means of moist plastic dye.

AUS. pub. 09/10 ©

04 4661