Page 283 - Wurth Total Catalogue

acrylic sealant For sealing joints indoors with low
movement absorption.

Can be painted/plastered over *
Outstanding adhesion of common paints/plasters
on sealant.

Broad range of applications
Suitable for indoor joints subject to low
expansion.

Additional advantages:
Silicone-free
Resistant to ageing, weather and UV.

Building Material Class B2 in accordance
with DIN 4102.

Note:
* Due to the multitude of paint and lacquer formulas available,
we recommend that you always carry out preliminary testing
in order to rule out interactions. Caution: Sealant joints that
have been fully painted over tend to crack when movement
occurs in the joint, as the applied paint is generally less
elastic than the sealant.
Description/Container Colour Content in mL Art. No. Pack Qty.
Cartridge white 310 0892 165 24
The color information can differ from the original for printing-related reasons!

Areas of application: aerated concrete, gypsum, gypsum plasterboard,
For sealing and connection joints with low plaster, chalky sandstone
compression and expansion loading indoors, Note:
e.g. for sealing cracks in masonry, plaster or The setting speed is dependent on the
concrete.
application temperature, the weather and the
Typical application surfaces: surface moisture. It is greatly delayed in cold,
With primer: Clinker, brick, wood, concrete, damp weather.

Technical data: Use:
Raw material base Acrylic resin dispersion Please comply with the overview
Primer On absorbent or porous surfaces. sheet entitled "General Notes on
Mixing ratio of acrylic sealant and water 1:1 to 1:5 Application for Sealants".
Max. take-up of continuous movement 5% of joint width
Skin formation time Approx. 10 min. at 23°C and 50% rel. humidity
Curing speed Approx. 1 mm/day; at 23°C, 50% rel. humidity
Temperature-resistance –20°C to 80°C
Application temperature +5°C to 40°C
Can be painted over * Yes, preliminary testing required
Compatibility with paint Yes, preliminary testing required
Contains fungicide No
Shore A hardness Approx. 50
Density 1.6 g/cm³
Elongation at failure with 2mm film 250% Partner Product:
AUS. pub. 06/13 © With this information, we want to advise you to the best of our knowledge based on our tests and experience. Cartridge Gun

Art. No. 0891 … ..
Preliminary testing required! For further information, see the Technical Data Sheet.

05 0581