Page 342 - Wurth Total Catalogue

BOND + SEAL ALL-IN-ONE

Hybrid-based sprayable and brushable
seam sealant for recreating OEM
finishes.

Sprayable and brushable.
Broad range of OEM structures can be readily
reproduced.

Solvent-free.
• No material shrinkage after drying.
• Satisfies the latest environmental protection
requirements.

Permanently elastic once hardened.
Colour Contents Art. No. Pack Qty. • Minimises the formation of cracks in the
White 300 ml 0893 236 110 paint, which can be caused by vibrations or
Grey 300 ml 0893 236 120 1/12 compressive loads.
Black 300 ml 0893 236 130 • Excellent stone chip protection.
• Resistant to mechanical damage.

Can be painted over up to five days
Areas of application: Application: later.
For permanently elastic, highly adhesive seam The surfaces must be clean, dry and free from • Can be painted over both before skin
seals, and for restoring the original structure dust and grease. Sand and prime plain aluminium formation (wet-on-wet) and also up to five
following accident repair work, e.g. in the with a fine sanding pad. Bond and Seal All- days later with all commercially available
engine compartment, luggage compartment, In-One is applied with the special Kombifix paints.
floor groups, wheel wells and on all overlapping compressed-air gun. • Ideally suited for painting over with water-
connecting seams. based paints.
Painting is possible wet-on-wet and up to five days
later with all commercially available paints (with UV-resistant.
the exception of alkyd resin varnishes). Very good ageing behaviour, even at unpainted
seams.

Very broad adhesive range.
• Adheres to most surfaces without priming.
• Permanent connections.

Isocyanate-free, PVC-free and silicone-
Technical Data: free.
Basic Information Bond + Seal All-In-One
Chemical Basis 1-POP Mixed Polymer
Shore A hardness 50
Min. skin-formation time /conditions 20 / at 23°C and 50% relative humidity
Ultraviolet resistance Yes
Min./max. processing temperature 5 to 30 °C
Min./max. temperature resistance -40 to 80 °C
Shelf life from production 15 Months
AUS. pub. 06/17 © Silicone-free Yes Partner Products:
at 5°C to 25°C
Conditions to maintain shelf life from production
Kombifix Gun
Solvent-free
Yes
Caulking Gun
05 4208