Page 338 - Wurth Total Catalogue

universal adhesive extra

Neoprene basis contact adhesive.

• Tolual-free.
• Significant reduction of health hazard.
• Broad adhesion range.
• Nearly any material can be bonded to each other.
• Easily spreadable.
• Can be applied easily on the surfaces to be joined with a brush or
spatula.
• Resistant to ageing.
• Durable bonding is guaranteed.
• Excellent elasticity.
• Compensates for material shifting.
Apply Universal Adhesive evenly • High resistance.
on both sides. • Resistant against diluted acids, water and alcohol.

Application surfaces:
For bonding of
• Wood, chip, wood fibre, hard veneer and decor panels.
• Laminated boards (Resopal, Duropal, Ultratops).
• Synthetic boards (tiles).
• Hard PVC, PMMA, polyester, polyamide, polycarbonate.
• Hard foam (phenolic resin and polyurethane).
• Rubber, felt, textiles, leather, plaster, metal, etc., with each other or
mixed.
• Not suitable for styrofoam.

Technical Data
Allow bonding surfaces to aerate, then join and press together.
Raw Material Base Neoprene on solvent basis
Colour Yellowish
Description Contents Art. No. Pack Qty. Viscosity Approx. 45 dPas
Universal Adhesive Solids Contents 25%
Extra - Tube 185ml / 163g 0893 100 022 1/12 Open Time 20 - 40 min at 21°C
Universal Adhesive Final Strength After 24 h
Extra - Can 730ml / 650g 0893 100 023 1/12 Ideal Processing Temperature 18°C - 25°C
Temperature Stability -20°C up to 110°C
Approx. 200 - 350 g/m²
Application Qty.
(both surfaces)
Pressing Power 7 - 8 N/mm²
Shelf Life 12 months

These notes are intended to provide our advice to the best of our
knowledge, based on tests and experience. However, we cannot assume
any liability for processing results in individual cases due to the wide
variety of applications as well as storage and processing conditions
beyond our control. This also applies if our technical and commercial
customer service is consulted free of charge and without any obligation.
AUS. pub. 05/14 © We recommend to carry out individual tests. We guarantee the constant Partner Products:
quality of our products. We reserve the right to technical modifications and
Brush
developments.
05 4151