Page 335 - Wurth Total Catalogue

HOT-MELT ADHESIVE

For dent removal adhesion technology.
Special hot-melt adhesive for paintless dent removal.
• All hot-melt adhesives are UV ageing- and water-resistant.

Description High-Strength Hot-Melt Adhesive Strong Hot-Melt Adhesive Universal Hot-Melt Adhesive
Colour Transparent Light brown Yellow Black
Length 195 mm 195 mm 180 mm
Dia. of hot-melt adhesive 11.5 mm 11.5 mm 11.5 mm
Content approx. 10 pc. approx. 26 pc. approx. 29 pc.
Pack Qty. (by weight) 180g 500g 500g
Art. No. 0890 100 050 0890 100 057 0890 100 058
Brief Description High tensile strength and hardness Great adhesion to painted surfaces Optimum for adapters with a diameter
make it best suited toward small thanks to strong adhesive power. of 21 mm or more. Good adhesion on
dents. Adhesive may be removed Optimum for adapters with a painted surfaces.
with Adhesive Removal Spray. The diameter of 21 mm or more. Easy Easiest removal of hot-melt adhesive with
adhesive material is removal with Adhesive Removal Adhesive Removal Spray.
hygroscopic. Spray.
Technical data
Basis Polyamide Thermoplastic Connection via Polymer Polymer-Based Connection
and Natural Resin
3
Density 0.89 g/cm at +20°C 0.93 g/cm at +20°C 0.96 g/cm at +20°C
3
3
Melting Point +135°C +100±5°C +85°C
Application Temperature +180°C–200°C +180°C–220 °C +190°C–210°C
Processing Time 20 sec. 15–40 sec. 20–45 sec.
Hardening Time 30 sec. 30 sec. 30–50 sec.
Shore A Hardness 77 50±20 40±20
Bonding Strength up to 6.5 N/mm 2 to 6.5 N/mm 2 to 2.7 N/mm 2
Shear Strength up to 3.5 N/mm 2 3.0±0.5 N/mm 2 1–1.5 N/mm 2
Tensile Strength up to 140 kg/cm 2 up to 140 kg/cm 2 up to 43 kg/cm 2
Viscosity 10,000 – 18,000 nPas 15,000 nPas 6,700 nPas
Thermal Stability +125°C +80°C +70°C
Resistance to cold –20°C –20°C –10°C
Shelf Life 24 months 24 months 24 months

Note: Successful dent removal depends to a great degree on the surrounding temperature and the temperature of the component.
• At temperatures under +10°C, the hot-melt glue cannot optimally bind to the painted surface. Heating up the painted surface with a hot-air blower
improves adhesion properties.
• At temperatures above +30°C, hardening of the hot-melt glue can be delayed. For this reason, we recommend cooling down with temperature reduction
spray.

AUS. pub. 08/10 © Partner Products:
Mini Lifter
Dent Lifter

05 4091