Page 331 - Wurth Total Catalogue

REPLAST EASY

Complete system for easy and professional repairs of plastic
parts.

An adhesive for almost all types of plastic.*
• No complex treatments of different types of adhesives.
• Useable for repairs and structural bonding.

Special positive mixer
• Optimal mixing for small volumes.
• Low loss of adhesive (waste).

Cures quickly.
• Further processing, e.g. grinding, possible after minimum period
of time.

Solvent-free adhesive.

Areas of Application:
Passenger Vehicles:
Spoilers, radiator grill, panelling clips, bumpers, brackets on headlamps
and radiator, etc.

Trucks and Buses:
Skirts, bumpers, air intake duct, wheel arches, etc.
Description Contents Art. No. Pack Qty.
Plastic Cleaner 500ml 0893 500 1 1 Motorbikes:
Plastic Primer 200ml 0893 500 2 1 All panelling.
Fast 2C-Plastic Adhesive 50ml 0893 500 3 1
Reinforcement Tape 3.5ml 0893 500 6 1 *Note:
Contour Film 3.5ml 0893 500 7 1 Due in part to the coatings and release agents used when manufacturing
Positive Mixer - 0891 486 25 plastics, in isolated cases there may be adhesion problems. Not suitable
Application Gun for the plastics PE (polyethylene) and PP (polypropylene) and PTFE
(Metal - Heavy Duty) - 0891 893 485 1 (polytetrafluoroethylene). If necessary, check material compatibility in an
inconspicuous place.

• Due to temperature resistance and material compatibility issues, this is
Technical Data not recommended for plastic radiator or fuel tanks.
Fast 2C-plastic adhesive
Application Time 1.5 min
Can be sanded at 23°C after 10 min
Shore Hardness D 79
Colour black
Maximum Temperature 100°C
Can be painted after 10 min
Application Gun -

AUS. pub. 10/15 ©

05 4061