Page 327 - Wurth Total Catalogue

SKG - SUPER FAST GEL ADHESIVE

Cyan acrylate assembly glue, gel-type.

• Stable consistency.
• The gel-type consistency prevents flowing or dripping to a large
extent.
• Quick curing.
• The adhesive is cured completely within a very short time.
• Universal use.
• Glues smooth as well as absorbent surfaces.
• Clean application .
• Simple and quick opening of the cap makes work easier.

Application:
The components to be bonded must be clean, free from grease and dry.
A very thin uniform layer of adhesive is to be applied to only one of the
surfaces to be bonded. Produce immediate bond by applying sufficient
pressure for complete contact. Maintain pressure during the time needed
for hardening.

Application Surfaces:
Description Contents Art. No. Pack Qty. Metal, cork, felt, leather, rubber, porcelain, synthetics (e.g. hard PVC,
SKG ABS, polystyrene) with and among each other.
Super Fast Gel 20g 0893 403 1 1/10
Adhesive Areas of Application:
Bonding of rubber profiles for wooden and synthetic windows, attachment
Specifications of signs, installation of rubber seals, repairs of broken edges.
Base Enthyl cyanoacrylate
Colour Transparent
Hardening System By air humidity
Viscosity 300 000 mPa·s (Brookfield)
Density 1.08 g/cm 3
Ideal Processing Temperature +20°C
Temperature Resistance -50°C bis +80°C
Fusion Point +165°C
20-100 sec. (depending on
Curing Speed
material)
Final Strength After 24 hours
Tensile Strength 20-30 N/mm acc. DIN 53288
2
2
Combines Tension and Shear 25.5 N/mm acc. DIN 53283
Resistance
Joining Gap Ideal 0.05 mm, max. 0.25 mm
Shelf Life 12 months (cool and dry)

With this information we wish to advise you on the basis of our trials and
experience to the best of our knowledge. However, we cannot accept
responsibility for the result when using this material in the individual case
because of the multitude of applications and of the conditions of storage
and processing which are outside our influence. This is also valid when
making use of our technical and commercial customer service which is
AUS. pub. 08/10 © supplied without obligation. We recommend always to carry out individual
tests. We guarantee consistent quality of our products. The right to carry
out technical changes and development is reserved.

05 4001