Page 323 - Wurth Total Catalogue

marathon fill

A nine component, high strength
thermosetting filler for use on
automobiles and boats.

Applications:
• Filling of metal, wood and composite
indentations, cavities and gaps.
• Predominantly used on automobile panels for
fixing dents.
• Filling any gaps requiring a flowable high
strength compound.
• Marathon filler can be applied over sanded
topcoats once abraded back with 60 to 80
grit sand paper.

Directions for Use:
Small batches of filler can be mixed in a CLEAN
Description Contents Art. No. Pack small cup, plastic beaker or on flat smooth plate
Qty.
Marathon Fill 3.4 Kg 0892 600 223 2 using a putty knife, tongue depressor or other
Hardener (Additional) 120 g 0892 240 002 1 mixing tool. Larger batches can be mixed directly
in a large pail at high torque and slow speed.
The proper amount of catalyst should be added
directly to the putty and immediately mixed.
Be sure to scrape the sides and bottom of the
container to ensure complete mixing. The gel
time clock starts as soon as the catalyst is added,
therefore, care must be taken to complete the
mixing and application of the filler timeously.
The properly mixed filler will gel evenly and cure
completely to its full strength in about 24 hours.

Mixing Ratio:
Wurth fillers are formulated and designed to be
cured by the addition of 1-2% Benzoyl Peroxide
(50%WW). Do not catalyse at levels below 1%
or above 2% as this may result in curing problems
or other physical defects.

AUS. pub. 03/14 © Please see over for instructions.

05 3625