Page 319 - Wurth Total Catalogue

SELF-LEVELLING GLAZING LIQUID FILLER

Extra fine polyester finishing putty ideal for finishing areas
of motor vehicle body work.

Perfect for the final skimming of a polyester body gla e or for direct
application onto minor imperfections on bodywork, before painting.

• Suitable for filling pinholes, scratches or sanding marks
• Smooth, liquid formula
• asily sanded
• asily spread
• No shrinkage
• Pinhole free formula
• Quick drying
• Great adhesion to surfaces
• deal for finishing

Suitable for use on bare metal, painted surfaces, aluminium, SMC,
fibreglass, lightly abraded ecoat and most plastics.
Basic Products
Self-Levelling Gla ing 30 nsaturated polyester resin Description Contents Art. No. Pack Qty.
Liquid Filler 0 inert filling material Self-Levelling Gla ing
50 Ben oyl Pero ide Liquid Filler 500g 0892 600 226 1
Liquid ardener
50 Phlegmatical Agents ardener 10g 0892 600 225
Plastic Spatula - 0899 471 1
Material Data Self-Levelling Gla ing Liquid Filler comes with 1 10g ardener.
Product Self-Levelling Glazing Liquid Hardener
Liquid Filler
Packaging 500g Squee e Bottle 10g White Tube Application:
Colour Light Green Red The surface must be clean and free of grease and rust. Mi filler on
Storage Appro - 12 months months clean non-porous board. Add 2 hardener. Mi filler and hardener until
at 15 - 20 C uniform colour is observed. Apply to area. Application time is 4-5 minutes
at 20 C. Curing time is 15-20 minutes. The surface must be dry before
sanding or filling.

Do not swallow.

Important:
Cool storage e tends shelf life. Applied product is heat resistant to 0 C.
Do not sand when wet. ardener mi ing ration should be measured
precisely.

For industrial use only.

These instructions are only recommendation. Preliminary testing is
recommended before use.

AUS. pub. 01/16 ©

05 3581