Page 320 - Wurth Total Catalogue

SELF-LEVELLING GLAZING LIQUID FILLER - DIRECTIONS FOR USE

Professional Liquid Filler
Base:
The surface must be clean and grease free.

Mixing:
No more than 2 (by weight) parts of hardener paste should be added to 100 parts of Self-Levelling Glazing
Liquid Filler. Excessive amounts of hardener paste can result in peroxide bleaching of the paint. Mix until
uniform colour is observed.

2% hardener

Working Time:
Working time is the processing time (4-5 minutes) after the Liquid Filler and the Hardener are mixed together.

4-5 min. 20°C

Hardening Time:
o
This is the amount of time until the repaired base can receive further work. At 20 C 15–20 minutes is normally required
before the filler can be sanded. When temperature is warmer the drying time shortens: If the temperature is cooler the
drying time lengthens. To gain time in the drying process, in winter, it is advised that metal surfaces are warmed using
infra-red or other heat lamps prior to application.

15-20 min. 20°C

Finishing:
The surface must be dry before finishing by sanding or filing. Sand with 40 - 180 grit paper.

P40 - 180

AUS. pub. 01/16 ©

05 3582