Page 38 - Wurth Total Catalogue

DIAMOND CORE DRILL BIT - M14 MOUNT

Specially developed diamond core drill
A. B.
bit for dry drilling of even the hardest
materials like porcelain stoneware.
For direct use on M14 mount angle
grinders.

Versatility ●●○○
Service life ●●●○
Drilling speed ●●●●
Diameter Length Design Art. No. P. Qty Drilled-hole quality ●●○○
5 mm 5457 235 005 Spot-drilling behaviour ●●○○
6 mm 62 mm 5457 235 006 Problem solver ●●●○
8 mm Special cooling wax 5457 235 008
10 mm (A) 5457 235 010 1 Extremely fast drilling.
12 mm 5457 235 012 Thanks to the vacuum diamond coating.
30 mm 60 mm 5457 235 030
32 mm Side slot 5457 235 032 Up to 12 mm diameter contains special
35 mm (B) 5457 235 035 cooling wax.

Easy core drill bit removal.
Bits with a diameter of less than 50 mm feature
side slots for cooling and dust removal.

No water cooling necessary.

Can be used on an angle grinder or drill
Special cooling wax. Side slots for cooling and For direct use on a conventional M14 mount with optional adapter - sold separately.
Sizes up to 12 mm. dust removal. Sizes 30 mm angle grinder.
onwards. Application:
Especially suitable for tiles and porcelain
stoneware with a material thickness up to 15 mm.
Suitable for hard ceramics, thin granite, marble
plates and high-fired brick.

Instructions:
• Tapping: With the bit spinning, make contact
at an angle, then move to a vertical position
little by little.
• Slightly circular drilling movements increase
Description Length Art. No. Pack Qty.
11mm Hexagon Adaptor to M14 57 mm 0668 901 003 1 the drilling speed and protect the core bit.
• Please note: Brief cooling breaks must be
taken, particularly when drilling for periods of
about 30 seconds or longer and with thicker
materials.
• Regular cooling breaks generally extend the
service life of the core drill bits.
• Core drill bits may only be used while
AUS. pub. 04/17 ©
spinning.

02 0787