Page 444 - Wurth Total Catalogue

WG-FIX SCREW ANCHOR 70

For fastening curtain rails, baseboards,
picture frames, bathroom and kitchen
accessories, etc.

• Fast, simple installation.
®
• Thanks to AW drive, longer bit service life,
improved force transmission, and no ejection
forces.
• Two head versions – raised countersunk head
for easy, clean countersinking and panhead
for large-area contact.
• Universal anchorless screw connection – even
on various surfaces, e.g. solid sand-lime brick,
Applications: Notes: clay brick and gypsum plasterboard.
Universal screw anchor for easy, secondary Apply with a low speed and torque setting. As • HiLo thread provides for increased over-
fastenings. soon as screw makes firm contact, do not screw turning torque.
in further. • High thread pitch enables fast screw-in speed.

Screw into gypsum plasterboard without
predrilling. Suitable for use in:
• Clay brick.
Anchor dimensions • Solid sand-lime brick.
Total length l [mm] 30 45 • Gypsum plasterboard.
Max. attachment height t [mm] 2.5 16 • Concrete.
fix
Raised countersunk head Art. No. – 0189 306 345 • Solid stone.
Panhead Art. No. 0189 363 30 – • Solid brick.
Drive AW20 • Hollow concrete block.
Pack Qty. 250 • Aerated concrete block.
• Plaster board.
Performance data • Timber.
Anchor diameter 6.3 • Sandstone.
Clay brick Mz 0.23
Recommended working Solid sand-lime brick KSV F [kN] 0.43
load rec
Gypsum plasterboard d ≥ 9.5 mm 0.01

Characteristic values
Nom. drill dia. d [mm] 4.0 Partner Products:
0
Drilled hole depth h ≥ [mm] 35 Bit AW20
1
Through-hole in the component being connected d ≤ [mm] 6.5
f Brick & Tile Drill Bit - 4mm

Surface: Solid stone Surface: Gypsum plasterboard

AUS. pub. 03/16 © Produce drilled hole. Clean drilled hole. Screw in screw As soon as screw anchor makes firm Screw in screw As soon as screw anchor makes firm

contact, do not screw in further.
contact, do not screw in further.
anchor.
anchor.
06 2185