Page 727 - Wurth Total Catalogue

DOT 4 BRAKE FLUID

High quality brake fluid for hydraulic brake systems.

• Corresponds to most DOT4/DOT-3/FMVSS 116 and SAE J1703.
• Can be mixed with all brake fluids of same specifications (check SDS).
• Boiling point above 250 C.
o
• Damp boiling point above 160 C.
o
• Very good protection against corrosion.
• Does not affect rubber material.
• Can also be used for hydraulic clutch systems.

Caution: Always check individual manufacturers’ recommendations
prior to refilling brake fluid reservoirs. Some vehicles require only DOT 3
fluid. Use only DOT 3 in this instance. If DOT 4 fluid is used in these brake
systems, damage can occur.

Description Contents Art. No. Pack Qty.
DOT 4 Brake Fluid 5L 0892 009 5
DOT 4 Pouring Tap 5L – 0891 302 01 1

AUS. pub. 03/15 ©

08 0601