Page 847 - Wurth Total Catalogue

AIR TOOL MAINTENANCE GUIDELINES

Wurth Air tools, as with all air tools need to be protected against continual Lubrication Guide:
neglect and misuse. To achieve maximum performance and service, please We recommend using Wurth air tool oil for all air tool motor lubrication
follow these simple operation and preventative maintenance guidelines: (via the air inlet).

1. Keep tools clean and lubricated. At the end of each day when you To ensure correct and constant lubrication we recommend using a Wurth
have finished using them, put a few drops of Wurth air tool Oil in the in-line oiler.
air inlet and operate the tool briefly to circulate the oil through the tool.
This will protect the tool from corrosion until its next use. Premium impact wrenches require the impact mechanism to be greased
2. Air tools need clean, dry air. Dust, corrosive fumes and excessive at regular intervals. We recommend the use of a Wurth impact wrench
moisture can all damage the mechanism of an air tool. An in-line filter grease gun kit.
and oiler can greatly increase the life of an air tool. The filter removes
the dust and moisture while the oiler meters the proper amount of There is a grease nipple on the metal hammer case that accepts the
lubrication to the tool for top performance. needle type grease tip. If using the gun daily (e.g for servicing tyres), the
3. Proper hose and high flow air fittings, are essential for top performance grease nipple should be lubricated monthly.
of air tools. An otherwise adequate compressor can be choked if the
wrong piping and fittings are used. A brass coupling reduces
4. Low air pressure reduces the speed of all air tools. Be sure that the air the available pressure
system is able to deliver the required air pressure at the tool inlet with for pneumatic tools by
the tool running. Low air pressure = low performance Performance Performance approx. 1 bar. On the
other hand, the steel,
5. High air pressure (above the recommended pressure) puts the air tool hi-flow type, can reduce
under excessive stress and dramatically reduces the life expectancy of the available pressure by
the tool. High air pressure = broken parts only 0.1 bar.

AIR TOOL ACCESSORIES

Socket Retaining Clips Special Oil For Pneumatic Tools.

Size Art. No. Pack Qty. • Excellent corrosions and wear protection in
3/8” 0703 000 38 mist oilers of conditioning units.
1/2” 0703 000 12 1
3/4” 0703 000 34 • Also effective at low temperatures.
• Resin and acid-free. Silicone free.

Contents Art. No. Pack Qty.
1L 0893 050 5 1
Grease Kit - Suits Premium Impact
Wrench

• For quick and regular maintenance of
the Wurth Premium Impact Wrenches.
• Lubricates the moving parts of the
impact mechanism and ensures
consistent performance and long
service life.

Caution:
Over greasing an air tool can cause reduced performance.

AUS. pub. 04/17 © Description Art. No. P. Qty.
Lubricating Set includes Grease Tube
0709 213 052
Gun & Grease Tube 125ml
1
0709 213 053
Replacement Grease Tube 125ml
11 1502