Page 1212 - Foton Workshop Manual - Aumark (BJ1099)

36-14 PARKING BRAKE - PARKING BRAKE

7. Remove the rear brake shoe
(a). Remove the locating lock pin of rear brake
shoe.
NOTICE:
• While removing the locating lock pin, rotate the
slot of half shaft flange to the locating lock pin to
ease the removal.
• Press the locating lock tab with a pair of nipper
pliers and rotate to ensure that the slot is
consistent with the locating lock pin.

(b). Remove the parking brake cable.
(c). Take down the rear brake shoe.

8. Check the thickness of brake shoe
Standard value : 9mm
Limit value : 2mm
Warning:
Replace the brake shoe when the thickness of the
brake shoe reaches the maintenance limit.

Page 1212