Page 1213 - Foton Workshop Manual - Aumark (BJ1099)

PARKING BRAKE-PARKING BRAKE
NOTICE:
The friction surfaces of the brake shoe and brake drum shall be free of contamination of oil
dirt and lubricating grease.
36-15
9. Check the inside diameter of brake drum
Standard value : Φ190mm
Warning:
Replace the brake drum when the inside diameter
of brake drum is beyond the maintenance limit.
10. Check for good contact between brake
drum and brake shoe
(a). Apply chalk dust onto the inner surfaces
of brake drum. Fit the brake shoe with the
inner surface of brake drum. If the entire
contact surface between brake shoe and
brake drum is contaminated with chalk
dust, it indicates the good contact between
brake drum and brake shoe.
(b). In event of poor contact between brake
shoe and brake drum, check the brake
drum and brake shoe and when necessary
replace.
36
11 . Install the rear brake shoe
(a). Connect the parking brake cable to the rear
brake shoe.
Page 1213