Page 1473 - Foton Workshop Manual - Aumark (BJ1099)

WIPER AND WASHER - WIPER ASSEMBLY 44-17

(c). Refit the front window left and right
trimmings.

fuwx44038

10. Install the wiper arm assembly (Refer to "Chapter 44 Wiper And Washer - Wiper
Arm Assembly, Replacement")
11. Connect the negative cable of the battery (Refer to "Chapter 18 Starting And
Charging – Battery, Replacement")
12. Check the auto return of the wiper assembly
• Turn on the wiper switch to position "INT/LO/HI" to run the wiper arm assembly. 44
NOTICE:
Do not turn on the wiper switch while the front windscreen assembly is still dry, in order to
prevent scratching the front windscreen assembly.
• Turn off the wiper switch to position "OFF" to automatically return the wiper
assembly.
• Check whether the wiper blade assembly is located on the lower edge of the front
windscreen.

REPLACEMENT(REAR WIPER ASSEMBLY)

1. Auto return of wiper assembly
(a). Auto return of wiper assembly.
• Turn on the wiper switch to position "ON" to run the wiper arm assembly.
• Turn off the wiper switch to position "OFF" to automatically return the wiper
assembly.
DANGER:
Do not turn on the wiper switch while the windscreen assembly is still dry, in order to
prevent scratching the windscreen assembly.
2. Disconnect the negative cable of the battery (Refer to "Chapter 18 Starting And
Charging – Battery, Replacement")
3. Remove the rear wiper arm assembly (Refer to "Chapter 44 Wiper And Washer -
Wiper Arm Assembly, Replacement")
4. Remove the back door guard board (Refer to "Chapter 56 Interior and Exterior
Finisher-Back Door Guard Board, Replacement")

Page 1473