Page 1468 - Foton Workshop Manual - Aumark (BJ1099)

44-12 WIPER AND WASHER - WIPER ARM ASSEMBLY

(d). Install and fix the fixed nut of the wiper arm.

(e). Install the trim cover of the rear wiper arm.
WARNING:
• After installation, turn down the wiper arm
assembly.
• Confirm that the wiper arm assembly is located
at the lower edge of the rear windshield
assembly.
(f). Check the self-return of the wiper arm
assembly.
• Turn the wiper switch to"INT/LO/
HI"position, make the wiper blade
assembly swing.
• Turn the wiper blade switch to"OFF"
position, make the wiper blade assembly
return automatically.
• Check whether the wiper arm assembly
is located at the lower edge of the rear
windshield assembly.

DANGER:
Do not open the wiper switch when the front
windshield assembly is dry so as to prevent
scratching the front windshield assembly.

Page 1468