Page 1465 - Foton Workshop Manual - Aumark (BJ1099)

WIPER AND WASHER - WIPER ARM ASSEMBLY 44-9

(e). Install the front wiper arm nut trim cap.
WARNING:
• Turn down the wiper arm assembly after
installation.
• Ensure that the wiper arm is located on the
lower edge of front windscreen assembly.
(f). Check the auto return of the wiper arm
assembly.
• Turn on the wiper switch to position "INT/
LO/HI" to run the wiper arm assembly.
• Turn off the wiper switch to position
"OFF" to automatically return the wiper
assembly.
• Check whether the wiper arm assembly
is located on the lower edge of the front
windscreen assembly.
DANGER:
Do not turn on the wiper switch while the front windscreen assembly is still dry, in order to
prevent scratching the front windscreen assembly.
44

Page 1465