Page 1464 - Foton Workshop Manual - Aumark (BJ1099)

44-8 WIPER AND WASHER - WIPER ARM ASSEMBLY

(e). Take down the wiper blade and right wiper
assembly.
WARNING:
Turn up the right wiper arm assembly and shake
the wiper arm assembly vertically to remove.

2. Install the wiper arm
(a). Clean the spline hole of the right wiper arm
with a round file or similar tool.
(b). Use a wire brush to clean the rotating shaft
spline of the wiper connecting rod.

(c). Properly reset the wiper arm assembly.
NOTICE:
• The wiper arm shall be located on the lower
edge of front windscreen assembly.
• Turn up the wiper arm assembly and position it
in place.

(d). Install the spring washer and tighten the
nut.

Page 1464