Page 1560 - Foton Workshop Manual - Aumark (BJ1099)

51-20 WINDOWS AND REARVIEW MIRRORS - FRONT WINDSCREEN

REPLACEMENT

1. Remove the engine hood (Refer to "Chapter 55 Door/Engine Hood - Engine Hood,
Replacement")
2. Remove the front wiper arm assembly (Refer to "Chapter 44 Wiper And Washer -
Wiper Assembly, Replacement")
3. Remove the lower windscreen trim (Refer to"Chapter 44 Wiper And Washer – Wiper
Assembly, Replacement")
4. Remove the rearview mirror (Refer to "Chapter 51 Windows And Rearview Mirrors-
Interior Rearview Mirror, Replacement")
5. Remove the A column upper panel (Refer to"Chapter 56 Interior/Exterior Trim -
A-Pillar Guard Panel, Replacement")

6. Remove the front windscreen
(a). Remove the seal with a special tool.
(b). Mark the front windscreen and the body as
illustrated.
NOTICE:
If the front windscreen is not intended to reuse, no
mark is necessary.

(c). Pass a thin wire through between the body
and the glass and tie the two ends of the
wire on wood or equivalent.
(d). Pull the wire around the front windscreen
to remove the adhesive.
NOTICE:
When separating the windscreen, be careful not
to damage the paint or interior or exterior trims.
In order not to scratch the dashboard when
removing the windscreen, place a piece of plastic
sheet between the wire and the dashboard.
(e). Remove the front windscreen assembly
with sucker.
NOTICE:
Be careful not to drop the front windscreen.
When removing the windscreen, leave as much
adhesive as possible on the body.

Page 1560